Home / Products

waste heat recovery modeling

  • Modeling and Control of a Parallel Waste Heat

    2014-6-30 · This paper presents the modeling and control of a waste heat recovery systemfor a Euro-VI heavy-duty truck engine. The considered waste heat recovery system consists of two parallel evaporators with expander and pumps mechanically coupled to the engine crankshaft. Compared to previous work, the waste heat recovery system modeling is improved by including evaporator models that combine

    Get a quote
  • Modeling, Optimizing and Testing Thermoelectric

    2019-1-16 · MODELING, OPTIMIZING AND TESTING THERMOELECTRIC GENERATORS FOR LIQUID-TO-LIQUID LOW GRADE WASTE HEAT RECOVERY Ali Eyddan Hamil, M.S.E. Western Michigan University, 2016 The use of thermoelectric generators (TEGs) for producing electricity from low grade waste heat is thought to be a great solution in the future to reduce the power

    Get a quote
  • Design and modeling of an advanced marine machinery

    2015-10-20 · heat recovery system. The results suggest that an organic Rankine cycle placed after the conventional waste heat recovery system is able to extract the sulphuric acid from the exhaust gas, while at the same time increase power generation from waste heat by 32.9% and the combined cycle thermal efficiency by 2.6%.

    Get a quote
  • Modeling and Simulation of a Thermoelectric

    Abstract. Waste heat recovery, using thermoelectric power technology, is a promising approach to reduce fuel consumption and CO 2 emissions on passenger cars. However, possible application requires optimizing heat exchangers and defining adequate thermoelectric materials to improve efficiency.

    Get a quote
  • COMPLEX HEATING, COOLING, AND HEAT RECOVERY

    2019-4-9 · AFFILIATED ENGINEERS, INC. 1 COMPLEX HEATING, COOLING, AND HEAT RECOVERY PLANT MODELING Energy Trust of Oregon Building Energy Simulation Forum 04/18/2018

    Get a quote
  • Waste Heat Recovery Archives - Andlinger Center for

    Learn about the Andlinger Center for Energy and the Environment and its mission, hear from our director, read the latest in news from the center, explore our building and its facilities, check out our events calendar, and discover other programs and activities happening within the center.

    Get a quote
  • Parametric and exergetic analysis of

    2016-8-28 · Parametric and exergetic analysis of waste heat recovery system ba_/__ 5|

    Get a quote
  • Modeling Analysis of Waste Heat Recovery via

    Modeling Analysis of Waste Heat Recovery via Thermo Electric Generators for Fuel Economy Improvement and CO 2 Reduction in Small Diesel Engines 2014-01-0663. This paper deals with modeling and analysis of the integration of ThermoElectric generators (TEG) into a conventional vehicle, specifically aimed at recovering waste heat from exhaust

    Get a quote
  • Exergy Efficiency Calculation and Parameter Optimization of

    2013-6-3 · To solve the problems of low-utilization rate of waste heat and production instability in sintering waste heat recovery, the sintering waste heat recovery system of a

    Get a quote
  • Figure 2 from Heat exchanger modeling and

    2019-9-13 · Heat exchanger modeling and identification for control of Waste Heat Recovery systems in diesel engines @article{Feru2013HeatEM, title={Heat exchanger modeling and identification for control of Waste Heat Recovery systems in diesel engines}, author={Emanuel Feru and Frank Willems and Chepa Rojer and Bram de Jager and Maarten Steinbuch}, journal={2013 American Control Conference},

    Get a quote
  • Waste Heat Recovery Unit - Tekla Global BIM Awards

    2014-1-7 · Heat Recovery. The Waste Heat Recovery Unit (WHRU) is used for the process of utilizing waste energy stream. The unit has a heating coil for a pressurized water circulation system, which delivers heat to acid gas removal reboilers, fractionation reboilers and other LNG process facilities.

    Get a quote
  • Waste Heat Recovery Resource Page | Department of

    It is estimated that between 20 to 50% of industrial energy input is lost as waste heat in the form of hot exhaust gases, cooling water, and heat lost from hot equipment surfaces and heated products. As the industrial sector continues efforts to improve its energy efficiency, recovering waste heat losses generate cost savings, reduces environmental impact, and improves work flow and productivity.

    Get a quote
  • Dynamic modeling of a sensible thermal energy storage

    2017-8-8 · Control-oriented modeling Thermal energy storage Immersed heat exchanger Hot water storage tank Waste heat recovery Demand response abstract In this paper we consider control-oriented modeling of a sensible thermal energy storage (TES) tank with a helical immersed heat exchanger (IHX) coil. A key focus of the modeling approach is to minimize the

    Get a quote
  • (PDF) Waste heat recovery rankine cycle based system

    Waste heat recovery rankine cycle based system modeling for heavy duty trucks fuel saving assessment. Pascal Dufour. Download with Google Download with Facebook or download with email. Waste heat recovery rankine cycle based system modeling for heavy duty trucks fuel saving assessment.

    Get a quote
  • Modeling and Optimization of Organic Rankine Cycle

    2016-4-5 · Modeling and Optimization of Organic Rankine Cycle for Waste Heat Recovery in Automotive Engines 2016-01-0207 In the last years, the research effort of the automotive industry has been mainly focused on the reduction of CO 2 and pollutants emissions.

    Get a quote
  • Optimized heating with low-grade waste-heat recovery

    2019-2-22 · The calculated office EUI with no consideration for waste-heat recovery was 35 kBtu/sq ft/YR, an excellent performance but still well above the goal. The only way to get the office below an EUI of 25 with the planned building systems was using the low-grade data center waste heat exclusively.

    Get a quote
  • Off-design performance modeling results for a

    2018-4-16 · Off-design performance modeling results for a supercritical CO 2 waste heat recovery power system Steven A. Wright [email protected] Chal S. Davidson [email protected] Craig Husa [email protected] SuperCritical Technologies, Inc. 5747 Imperial Way SW, Bremerton, WA 98312

    Get a quote
  • Multiphysics Modeling and Development of

    2018-12-19 · Multiphysics Modeling and Development of Thermoelectric Generator for Waste Heat Recovery Asutosh Prasad1, Raj CN Thiagarajan1 1ATOA Scientific Technologies Pvt Ltd, Bengalore, Karnataka, India Abstract Waste heat is inevitable in any heat

    Get a quote
  • Multiphysics Modeling and Development of

    2019-9-23 · Multiphysics Modeling and Development of Thermoelectric Generator for Waste Heat Recovery Asutosh Prasad [1], Raj CN Thiagarajan [1], [1] ATOA Scientific Technologies Pvt Ltd, Bengalore, Karnataka, India

    Get a quote
  • Thermoelectric Generators for Automotive Waste Heat

    A numerical model has been developed to simulate coupled thermal and electrical energy transfer processes in a thermoelectric generator (TEG) designed for automotive waste heat recovery

    Get a quote

Related Products